High Five Vape - Micro E-Nail Quartz E-banger Bucket Kit

High Five Vape - Micro E-Nail 25mm Quartz E-banger Bucket Kit 

The Micro High Five Enail is one of the best Enails on the market! It is calibrated to show the actual temperature of the vaporization surface instead of just the coil temperature, unlike other competitors. Their compact XLR Micro Controller box is powered by a microprocessor so you can ensure that every dab you take is at your precise desired temperature instead of just the coil temperature, unlike other competitors on the market. This smarter "Brain" allows for more features/functions, low energy usage, steady temperature (no more than 1-3°F fluctuation) and longer lifespan. 

 This kit includes  a 25mm Axial Enail coil, and also a 14mm Male 90 Degree Fully Welded Quartz Banger, the coil fits comfortably on the bottom and is held securely in place with a cotter pin or an o-clamp.  A fully weld banger is more durable and heat resistant than a typical two part banger that is joined at the bucket. This enail coil is compatible and can be used with other 25mm diameter enail bangers, check out our enail banger section by clicking here.

Secure your coil and banger on the High Five coil stand. Perfect for when you have to clean your setup or need a safe place to store your coil while cooling down. Compatible with any and all heater coil type and size. This stand can also be used to hold accessories such as carb caps and dabbers. Made of medical grade stainless steel painted matte black.

Specifications:

Controller Box:

• Max Temp : 0 - 1000 Degrees Fahrenheit
• Plug Type : 120V USA
• Coil Connection: 5PIN Female XLR
• Controller Dimensions : 5" x 3" x 2"
• Box Material : Metal
• Power Cord Length : 6ft 

Enail Coil:​

• Coil Length : 5ft
• Coil Type: Axial 
• Coil Size: 25mm

Bucket Enail Banger:

• Joint Size: 14mm
• Joint Angle: 90 Degree
• Joint Gender: Male
• Banger Bottom Diameter: 25mm

Features:

• Last Set Temperature Memory 
• Separate On/Off switch for Coil and Box
• 2 Year Manufacturers Warranty on Controller
• Self Cleaning Mode
• Automatic Shutoff / Timer
• Quick Heat Up with No Overshoot
• Calibrated to Show Temperature of the Vaporization Surface, NOT the Coil Temperature 

Includes:

• 1 x Controller with Display
• 1 x 25mm 14mm Male 90 Degree Quartz E-Banger
• 1 x Directional Air Flow Carb Cap
• 1 x Coil Stand
• 1 x 5ft 25mm Axial Enail Heater Coil
• 1 x 6ft Long Power Cord
• 1 x User Manual

Desktop and Portable Options Available

Enails come in two categories: desktop and portable. Desktop enails may be battery-powered or plug into an outlet, and they are larger in size, usually having a wider array of output capabilities. Meanwhile, portable enails have lower battery capacities, but the tradeoff is that you can take them with you easily wherever you go.

Offer Precise Temperature Control

Yes, temperature is the most crucial component of dabbing. The temperature that your dabs reach determines the potency, amount of flavor and vapor that you experience, as each compound in your concentrate has a specific boiling point at which its properties are activated. A huge benefit of using an enail is that you can set the exact temperature that you prefer and know that each and every puff of vapor will therefore be identical to the last.

Different E-Nail Coil Sizes and What they Do?

The e-nail coil size determines the size of the banger or nail that will be able to be used with it.

Consequently, the diameter of the banger, will impact the surface area available for vaporizing. Impacting the amount of concentrate able to be efficiently used at a time. For example, if using a 16mm banger with a 16mm enail coil at 450 degrees temp vs. using a 35mm banger with a 35mm enail coil at 450 degrees temp. You can put two - three times more concentrate in a 35mm than you would a 16mm while keeping the same vaporization rate and minimal pooling.

The coil size and heat able surface area of the banger or nail will determine the vaporization rate and amount of concentrates you can vaporize at one time.

Difference in Joint Sizes 10/14/18mm

There are a few specifications you can garner from a pipes joint size…

• 10mm - Typically, when you are using a 10mm joint you will be working with a smaller pipe with less water filtration and airflow. These are predominately used for concentrates to enable smaller smoother inhales.
•  14mm -The 14mm joint sizes are the most common, they are typically found in a range of heights and percolator set ups, while offering more water filtration options than smaller 10mm pipes.
• 18mm-19mm - This joint size (18mm) is traditionally reserved for those with “lifeguard lungs”, who can consume larger inhales, the pipes are typically much larger in size sometimes up to 6 ft. while offering the most water filtration.

To put it simply it’s the straw concept. Think of using any coffee straw verses using a large milkshake straw, soda straw. With one you can inhale a large amount the other would be more constricted. Some people would prefer the more constraint straw e.g. the “coffee straw” (10mm).

Compatible with :

• Bangers : 14mm Male Banger 30mm Diameter
• Pipes: 14mm Female Joint Bong or Rig

Quick Tip

Hot temp Vs Low Temp – Just because you can take these devices upwards of 900 degrees doesn’t mean you would want to nor is it advised. Many dabbers have a “sweet spot”, referring to the temperature at which the flavor, potency and vapor quality are all completely in line with the user’s preferences. Each dabber’s sweet spot is unique based on what it is that they want out of their dabbing experience. Using a torch to heat your nail means that finding your sweet spot can be a hit or miss, as it’s hard to memorize exactly how you applied the torch to get that quality experience. With an enail, you can keep the setting that you like so that you always find that sweet spot with each pull of vapor that you take.

To Read More about High Temp Vs Low Temp Dabbing Click Here!